RV 12 Fuselage Progress 10/18/08

On Pg 20-03 we started working on the bottom skin. We've been working on two sawhorses with a the shipping box on top. But we found that working with the f-1204 Center Section Assembly, that it was easier to remove the box and use a couple of long 2X4's or 2X6's on the sawhorses instead; that way we had access to more of the rivet holes and we could turn the assembly upside down (rightside up) for ease of assembly. We kept it that way until we actually started with the flooring assembly where we needed a larger flatter area. We found it helpful to use a magic marker and mark the areas on pg 20-04 where we were supposed to LEAVE OPEN.